When you want to maximize the length adjustment
of your assembly at the point where a wire rope is
attached, the threaded sleeve is ideal.
The sleeve is made to meet your requirements.
The standard sleeve material is carbon steel, but
stainless steels and higher strength steels are also
available on request. We furnish the sleeves with-out
wrench flats unless specified on the order.
You should also measure the length of the assem-bly,
using the maximum dimensions (from the out-side
end of the sleeve).
To determine the thread length (TL), use the mini-mum
dimensions needed. This allows us to use
existing qualified designs. The standard thread
used is Right Hand National Course Class 2A, but
other threads are available on request.
|After Swage Dimension|
| || ||+ .00|| || ||+1/16|
| || ||-.010|| || ||-0|
|7/32||7/16|| ||2||1-1/4|| |
|1/4||1/2|| ||2||1-1/4|| |
|3/8||3/4|| ||3||1-3/4|| |
|1/2||1|| ||4||2-1/4|| |
|9/16||1-1/8|| ||4-1/2||2-1/2|| |
|5/8||1-1/4|| ||5||2-3/4|| |
|1-1/8||2-1/4|| ||9||6|| |
|1-1/2||3|| ||12||9|| |
All dimensions are in inches.
You may order custom designs with dif-ferent
fitting lengths if you want, but that
may reduce the assembly’s overall rated
capacity. Call our customer service de-partment
to evaluate all the possibilities.