MO-ST®—Models 1, 1A & 2
The Impact type wire rope cutters are the original por- table
tools invented by Morse-Starrett to cut wire rope.
The cutters are actuated by striking with a hammer,
they are easy to operate and do a superior cutting job
with only a few blows of a hammer. These cutters are
precision engineered to deliver a cut without affecting
the original roundness of the wire rope. The blades
and dies are made of the finest tool steel available,
heat treated and ground to close tolerances. The impact
style cutters are available in three sizes and cutting
capacities. The Model 1 has a 3/4” capacity, the
Model 1A a 1-1/16” capacity and the Model 2 has a 1-1/2” capacity.
HYDRASHEAR®—Models W-075,
P-1125 & C-1750
The self-contained hydraulic cable cutter is a precision engineered
tool designed to give a clean cut with minimum effort.
Just pump the handle...no outside power is required. This
self-contained portable tool can be easily carried and is used
by contractors, rigging lofts and elevator repairmen. All three
models will operate under water. The Pell HYDRASHEAR® is
recommended by wire rope manufacturers and used by industries
throughout the world. The blades and die sets are
made of the finest tool steel available, heat treated and ground
to close tolerances. This means a long life for the blades as
well as superior performance. The hydraulic cutters are available
in three sizes and capacities. The Model W-075 has a 3/
4” capacity, the Model P-1125, a 1-1/8” capacity and the Model
C-1750 has a 1-3/4” capacity.
HYDRASHEAR®—Models POC-1125,
POC 1750 & POC2500
The power operated cutters require an external hydraulic
power source for operation. These models can be
activated by any electric, gasoline, hand, battery or air
operated hydraulic pump capable of developing 10,000
PSI and having free flow return through the pressure line.
The pumps are hose-connected to the HYDRASHEAR
body. The power operated cutters are available in three
sizes and cutting capacities. The Model POC1125 has a
1-1/8” capacity, the Model POC1750, a 1-3/4” capacity
and the Model POC2500 a 2-1/2” capacity.